Note: This kit need the external power adapter to power on the device.
Passive PoE Injector and PoE Splitter Kit allows low cost of delivering power over the network cable for shorter distances.
This kit allows power to be carried on 10/100 networks over the spare, unused pairs of a CAT5, CAT5E, CAT6 or CAT7 Ethernet network cable. On shorter network lengths, The power source could feed the wireless access point, IP video surveillance camera,Ip phone etc.
This Kit contains both very cost effective injector and splitter. The injector inserts the DC voltage at the source location into the 5.5mm x 2.1mm injector plug,
Then the DC voltage run through the spare pairs of the 10BASE-T or 100BASE-T network cable to the Splitter side,
And the splitter splits the DC voltage from the network cable into the 5.5mm x 2.1mm DC jack.
Power feed Pins: 4/5(+), 7/8(-)
Color | Black/ White |
Material | Plastic |
Injector | RJ45 Male + Power In to RJ45 Female |
Splitter | RJ45 Female to RJ45 Male + Power Out |
Supports | 5V, 12V, 24V, 48V |
Power plug / jack | 2.1 * 5.5mm / 0.9 * 2.2in |
Power Pins | 4,5 + and 7,8 |
Length | 18cm / 6.9in |
Transmission distance | 30-40 m / 100-130 ft |
Application | WLAN, routers, switches, internet telephony, security monitoring etc |
This Kit contains both very cost effective injector and splitter.
The injector inserts the DC voltage at the source location into the 5.5mm x 2.1mm injector plug
Then the DC voltage run through the spare pairs of the 10BASE-T or 100BASE-T network cable to the Splitter side,
And the splitter splits the DC voltage from the network cable into the 5.5mm x 2.1mm DC jack. Power feed Pins: 4/5(+), 7/8(-)
Fangbei, a premier manufacturer specializing in network connectors, terminals, electronic components, and cutting-edge network tools.
+86 769 8127 1686 +86 186 8105 2977
186 8105 2977